This page has been automatically translated. There may therefore be discrepancies and inaccuracies in the text. Only the original version is binding. Legal claims arising from the content of the translated version are excluded.

Display removal of an installation

Display the removal of an installation without a procedure in accordance with § 60 BauO LSA
  • Service description

    You must notify the lower building supervisory authority in advance if you wish to remove a structure.

    This applies to disposal that does not require a procedure.

    You may dispose of the following installations without having to follow the procedure:

    • Installations in accordance with Section 60 (1) BauO LSA (for example: smaller garages, masts or walls)
    • Detached buildings of building classes 1 and 3
    • and other installations that are not buildings with a height of up to 10 metres.

    You can start removing the installation one month after your notification if the building supervisory authority does not take any building supervisory measures.

    If you only want to remove part of a building project, this is a change to a building structure. You will need a building permit for this.

    The following applies to non-detached buildings: You must have the stability of the building or buildings to which the building to be removed is attached checked. The inspection must be carried out by a qualified structural engineer. The removal must then be monitored. This does not apply if the building is attached to a building that is not subject to a procedure.

  • Procedure

    You can report the removal of an installation online or in writing.

    Proceed as follows to submit an advert in text form using the form:

    • Please fill in the form.
    • Attach the required documents.
    • Submit the notification to the responsible lower building supervisory authority.
    • The lower building supervisory authority accepts the notification and proof from the qualified structural engineer and checks that they are complete.
    • If documents are missing or if there are other ambiguities, you will be asked to submit the missing documents or to clarify the ambiguities.
    • In this case, submit the missing or amended documents or the clarification.
    • The lower building supervisory authority will check your notification
    • If you have not heard back after one month, your report has been accepted and you can start the removal process.
  • Who should I contact?

    Lower building supervisory authority

  • Which documents are required?

    • Advertisement (digital or written)
    • for non-detached buildings:
      • Proof of stability and
      • Confirmation of stability from a qualified structural engineer
  • What fees are incurred?

    The advert is free of charge. There are no charges for this.

  • What deadlines do I have to observe?

    You must notify the removal at least 1 month in advance.

  • Legal basis

  • Applications / Forms

Help with accessibility

  • General

    We strive to make our websites accessible to all users. Details can be found in our accessibility statement. You can send us your suggestions for improvement using our accessibility feedback form.

  • Font size

    To adjust the font size, please use the following key combinations:

    Larger

    command
    +

    Smaller

    command

    Larger

    Ctrl
    +

    Smaller

    Ctrl
  • Keyboard navigation

    Use TAB and SHIFT + TAB to navigate through next/previous links, form elements, and buttons.

    Use ENTER to open links and interact with elements.

  • Contrast mode

    Press the following key combination to reduce or increase the contrast:

    Enlarge

    control
    option
    command
    .

    Decrease

    control
    option
    command
    ,
    Note: The shortcuts must be activated in the system settings of the operating system.

    Press the left ALT key + left SHIFT key + PRINT to quickly turn high contrast mode on or off.

  • Invert colours

    Press the following key combination to switch the colour inversion on and off:

    control
    option
    command
    8
    Note: The shortcuts must be activated in the system settings of the operating system.

    First activate the screen magnifier and then switch the colour inversion on and off with the following key combinations:

    1. screen magnifier

    +

    2. invert colours

    Ctrl
    Old
    I
  • Screen magnifier

    Press the following key combinations to use the screen magnifier:

    Switch on/off

    option
    command
    8

    Enlarge view

    option
    command
    =

    Zoom out view

    option
    command
    Note: The shortcuts must be activated in the system settings of the operating system.

    Switch on / Enlarge view

    +

    Zoom out view